---
title: "How to create a private booking link for specific clients"
url: https://meet.barq.dev/guides/private-booking-link-for-vip-clients
updated: 2026-11-17
author: "Hammad Ali"
---

# How to create a private booking link for specific clients

> **Short answer:** Create a separate event and enable "Secret event" under [Booking page](https://meet.barq.dev/glossary/booking-page) to make a private booking link in Barq Meet. It disappears from your public event list but remains reachable by direct URL. Use single-use access for one booking, and approval when you need to review the person requesting it.


## What makes a private booking link private?

A secret booking page is private in the sense that it isn't listed among your public event offers. Anyone opening the direct URL can still reach the offer, which is why a private invitation needs a separate decision about approval or single-use access. Share carefully. A hidden event leaves visitor identity unverified. The [spam-booking guide](https://meet.barq.dev/guides/stop-spam-bookings) separates opening a public URL from whether a submitted email address is allowed to complete a reservation.


For example, a public 15-minute introduction and a private 45-minute review can use separate events. Clients who receive the review URL can request the longer appointment without that offer appearing to everyone browsing your profile.


We exclude secret events from the public profile's event list. We still let their direct links open, which is the behavior that makes this arrangement practical for ongoing client relationships. For telephone consultations, [make the calling arrangement explicit](https://meet.barq.dev/guides/let-clients-book-phone-calls) so clients know who initiates the call and which number to use.


You'll need an event to customize, its intended schedule, and a decision about whether one invitation should accept repeated bookings. If you only want to offer a few dates, start with [hand-picked one-off meeting times](https://meet.barq.dev/guides/one-off-meeting-links).


## How do I create a private booking link for clients?

Open the event editor, choose Booking page, enable "Secret event", and save before copying the direct URL. Verify the location and duration too. A private link that points to the wrong appointment creates the same confusion as a public one, with fewer people available to notice it.


1. Create an event for the client appointment or duplicate a similar offer.
2. Give it a description that says who the session is for.
3. Review its duration and assigned schedule under "When people can book".
4. In Booking page, turn on "Secret event".
5. Save, copy the direct event URL and open it without your host session.
6. Inspect the public profile to confirm the offer isn't listed there.


Send the event URL, not the general profile URL. The profile deliberately omits the offer you have hidden, so the client shouldn't have to guess which appointment they were invited to book.


We choose a meeting's location per event. If the private session should happen by phone, change that event's location instead of assuming a copied description changes its conferencing setting.


## Should a VIP invitation be reusable or single-use?

Use a reusable secret event URL for clients who should keep booking the same offer. Use a single-use link for a single appointment invitation. Decide before sending. The recipient shouldn't discover that a link has closed while trying to arrange the next session you expected them to book.


| Link choice | What you control | Good reason to choose it |
| --- | --- | --- |
| Secret event URL | Public listing visibility | Returning clients can reuse it |
| One-off link | Offered dates and times | You want to propose selected openings |
| Single-use link | Stops accepting after one booking | One invitation should produce one appointment |
| Approval-required event | Host review of requests | You need to check the request first |

A computed example: a reusable 30-minute offer with four available starts can support later visits as availability changes. A single-use invitation that initially offers the same four starts stops accepting new bookings after one successful appointment; four choices don't mean four entitlements.


Read [how one-off and single-use links differ](https://meet.barq.dev/features/one-off-and-single-use-links) before choosing. Neither a hidden listing nor a limited number of uses establishes that a forwarded URL reached the intended person.


## Can I approve requests from people who have the URL?

Yes. Enable "Requires approval" under Booking page if each request needs your review before confirmation. Tell the client what will happen. A client who submits an appointment request and is still waiting for you to accept it shouldn't receive an introductory message claiming the time is already confirmed.


We place the approval control alongside the other Booking page settings. The [meeting approval guide](https://meet.barq.dev/guides/approve-meeting-requests-before-booking) explains the decision step and what guests should expect while waiting.


For a private advisory session, you might use a required question asking for the project reference. Keep the question short and avoid collecting confidential project details that aren't needed to arrange the meeting.


Approval can help you reject an unexpected request, but it doesn't prevent someone reading a page whose link they possess. Keep sensitive client names, contract details and private addresses out of a broadly reused event description.


## How do I check that a secret booking page behaves correctly?

Test the public profile and the direct event URL as two separate destinations. Then make one controlled appointment through the direct link. Check the result. Before sending the invitation, you want evidence that the offer is absent from the profile yet reachable through its direct URL with the intended duration and location.


| Test | Expected observation | If it fails |
| --- | --- | --- |
| Open public profile | Private offer absent | Check Secret event was saved |
| Open direct URL | Invited offer appears | Check event is active and URL is correct |
| Request a known free start | Correct duration and location | Review copied event settings |
| Try a used single-use invitation | No new successful booking | Confirm the invitation's use setting |

Don't reuse a single-use test invitation for the client after consuming it. Create the actual invitation after testing, and verify that its destination matches the offer you intended to send.


A secret appointment still uses your selected Google calendars for conflicts. We check availability again when someone submits a booking, so possession of the URL doesn't reserve a time indefinitely.


There's no paid tier needed to hide an offer; normal fair-use safeguards still apply. Review [what an account includes](https://meet.barq.dev/pricing), then [create an invitation-only appointment offer](https://meet.barq.dev/app/sign-in).

## Steps

1. **Choose the private appointment offer**: Create or duplicate an event for the client appointment. Check its duration, location and schedule before sharing its direct URL.
2. **Enable Secret event**: Open Booking page in the event editor and turn on Secret event. Save the event so it is omitted from the public event list.
3. **Choose reusable or single-use access**: Use the direct secret event URL for repeated appointments. Choose a single-use link when the invitation should stop accepting bookings after one succeeds.
4. **Check Requires approval if needed**: Enable Requires approval under Booking page when you want to review each request. Explain that the requested time still needs your decision.
5. **Test profile and direct link**: Inspect your public profile and then the direct event URL in a private window. The offer should be hidden on the profile but reachable through the direct link.

## Frequently asked questions

### Does a secret link work only for the named client?

No. Hiding the event from your profile doesn't verify the identity of someone opening its URL. Treat the URL as shareable and use approval when you need to review who requested the appointment. Send the address only through the client channel you intend to use, with approval or another identity-checking process when knowing the recipient matters beyond possession of the invitation's URL.

### Can I keep a public introduction call alongside a private offer?

Yes. Use separate events and mark only the private offer secret. Check the public profile after saving, then inspect each direct event URL so you don't accidentally distribute the wrong appointment. Check the public profile and direct private address separately, so a guest can discover the introduction without being shown a client-only conversation whose purpose would not make sense to them.

### Is a one-off invitation always used up after one booking?

Check its single-use setting. Offering a hand-picked set of times describes which appointments are offered, while single-use describes whether the invitation closes after a successful booking. Those are different decisions. Inspect the invitation's closing option before sending it, because hand-picked times can be offered with a different reuse intention from a link deliberately restricted to one successful booking.

## Related pages

- [How to create a custom times link](https://meet.barq.dev/guides/one-off-meeting-links)
- [Custom times links and single-use links](https://meet.barq.dev/features/one-off-and-single-use-links)
- [How to approve meeting requests before booking](https://meet.barq.dev/guides/approve-meeting-requests-before-booking)
- [How to stop spam and unwanted bookings on your booking page](https://meet.barq.dev/guides/stop-spam-bookings)
- [How to let clients book a phone call with you](https://meet.barq.dev/guides/let-clients-book-phone-calls)
- [What is a booking page?](https://meet.barq.dev/glossary/booking-page)

[Create your free booking link](https://meet.barq.dev/app/sign-in)
